Check out Atomic Chess, our featured variant for November, 2024.

Enter Your Reply

The Comment You're Replying To
Gerd Degens wrote on Sun, Nov 13, 2022 07:22 PM UTC in reply to Fergus Duniho from 04:45 PM:

No, it cannot. Let me break the move down into steps. First, the Bishop on e8 moves to d7. At this point, movement in the same direction must go through the opposite corner is just passed through. This is the corner that d7 shares with c6. Continuing in the same direction, it can go to b5. At b5, it can move diagonally to A4, because b5 and A4 share a corner but no sides. Also, this is in the same direction that the move from e8 to b5 was in. However, b5 and a4 do share a side, which means that movement from one to the other is not diagonal. So, a move from e8 to a4 would be illegal.

This is a very special consideration. Do you think that such can be communicated to potential players?

Why do we leave out consideration of equal/different corners and sides? Can't we agree that switches can be entered from all sides and a choice must be made between the fields of the switch? Surely that would be much easier for everyone.

In the discussion at the time, I just took your position, but ran into a wall looking for a simple solution. I came to the conclusion that switches have a special status, which must lead to a choice between the fields of a switch from all sides - from above, from below and from the side.

No, that is completely the opposite of how I understand the rules.

A bishop on e8 or d1 can move to A4 or a4 respectively to h5 or H5.

This is unintelligible. If you mean what you said above, it is contrary to my understanding of the rules.

What can I say? I think my position is quite logical. At the beginning of the discussions, I was of the opinion that switches work differently when they are operated from below, from the side, or from above. I have abandoned this opinion and changed it in favor of a pragmatic solution, in that a switch must be handled the same regardless of the direction.

Are you saying that a piece cannot capture a piece in a Switch unless it can move to the space the piece is on? Or are you saying that when a piece can move to either space in a Switch, it can move to the Switch and capture the piece, and then it must occupy the space the piece was on?

This seems to me to be much simpler than you make it out to be.
After all, a piece can only be captured where it is. Why should this be different for a switch?
Why should a piece be able to move to A4, and thereby capture a piece on a4 quasi en passent? That only happens with pawns. But that's where it should stay. The basic principle should be that pieces are captured on the square on which the pieces were placed. Pragmatic solution, isn't it?

They are the same, but I removed the ambiguities in his description and used some technical language. Since the King cannot move into check, and a Knight is not subject to the same restriction, I replaced the reference to two King moves with one to two one-space moves. Since I would normally refer to ranks and files rather than to rows and lines, and since I have been using these words in an algebraic sense rather than a geometric sense, I rewrote it to not use them. To "leap directly" is technical terminology that implies that a move "does not move across squares that lie in between."

I think I have understood that.


Edit Form

Comment on the page Chess 66

Conduct Guidelines
This is a Chess variants website, not a general forum.
Please limit your comments to Chess variants or the operation of this site.
Keep this website a safe space for Chess variant hobbyists of all stripes.
Because we want people to feel comfortable here no matter what their political or religious beliefs might be, we ask you to avoid discussing politics, religion, or other controversial subjects here. No matter how passionately you feel about any of these subjects, just take it someplace else.
Avoid Inflammatory Comments
If you are feeling anger, keep it to yourself until you calm down. Avoid insulting, blaming, or attacking someone you are angry with. Focus criticisms on ideas rather than people, and understand that criticisms of your ideas are not personal attacks and do not justify an inflammatory response.
Quick Markdown Guide

By default, new comments may be entered as Markdown, simple markup syntax designed to be readable and not look like markup. Comments stored as Markdown will be converted to HTML by Parsedown before displaying them. This follows the Github Flavored Markdown Spec with support for Markdown Extra. For a good overview of Markdown in general, check out the Markdown Guide. Here is a quick comparison of some commonly used Markdown with the rendered result:

Top level header: <H1>

Block quote

Second paragraph in block quote

First Paragraph of response. Italics, bold, and bold italics.

Second Paragraph after blank line. Here is some HTML code mixed in with the Markdown, and here is the same <U>HTML code</U> enclosed by backticks.

Secondary Header: <H2>

  • Unordered list item
  • Second unordered list item
  • New unordered list
    • Nested list item

Third Level header <H3>

  1. An ordered list item.
  2. A second ordered list item with the same number.
  3. A third ordered list item.
Here is some preformatted text.
  This line begins with some indentation.
    This begins with even more indentation.
And this line has no indentation.

Alt text for a graphic image

A definition list
A list of terms, each with one or more definitions following it.
An HTML construct using the tags <DL>, <DT> and <DD>.
A term
Its definition after a colon.
A second definition.
A third definition.
Another term following a blank line
The definition of that term.